Major enterprises produce the necessary smoke and dust purification equipment, 10 years of professional manufacturer, PURE-AIR filter cartridge dust collector, filter cartridge dust collector.

Filter cartridge dust collector, welding arm fume extractor should pay attention to the following points when selecting filter materials:

1) Wood pulp fibers should be thinner, shorter, crimped, and irregular in cross section.

2) Cartridge dust collector, welding dust filter structure is mainly coated filter paper. When using a single-layer substrate, specific analysis of dust should be carried out to confirm the material.

3) Fine particle dust is difficult to collect, and it is easy to form a dense dust layer after collection, which is not conducive to dust removal. On the contrary, coarse particle dust is easy to collect, and the dust layer formed after collection is loose, which is beneficial to dust removal. In a sense, the fine and coarse dust mixing conditions are conducive to filtering and dust removal.

2. Corrosion of dusty gas.

Different fibers have different chemical resistance and are often affected by factors such as temperature and humidity. In contrast, PTFE fiber has the best chemical resistance, but it is more expensive. Therefore, when choosing a filter material, it is necessary to understand the main factors according to the chemical composition of the dust-containing gas and select the appropriate material.

PURE-AIR technology is committed to building a world-leading brand of safe, intelligent and efficient smoke and dust purification equipment. More than 3,000 square meters of standard workshop, 10 years of production and more than 30 industry application experience. Cartridge dust collector, welding air filtration.

If you want buy fume extractor, please contact with Dongguan Pure-Air Tech Co.,ltd, E-mail: sales@pure-airtech.com