In fact, all manufacturing and processing entrepreneurs around the world know the hazards of workshop dust. After talking about the hazards today, you will know why the workshop needs matching welding fume collector equipment.

One of the industrial fume purification equipment is the more common welding fume dust collector. This article by PURE-AIR Technology introduces nine necessary technical conditions for welding fume dust collectors.

1. The minimum suction air volume of the welding fume purifier is not less than 50m3/h.

2. The noise of the welding fume purifier shall not exceed 85 decibels (A).

3. The insulation resistance between the live parts and the casing of the smoke purifier shall not be less than 1MΩ during the withstand voltage test, and the insulation shall not be damaged.

4. The deviation between the actual processing air volume of the welding fume purifier and the rated air volume shall not exceed 8%.

5. The air leakage rate of the welding fume purifier is not more than 3%.

The deviation between the actual working resistance of the welding fume purifier and the rated working resistance shall not exceed 10%.

7. The filtration efficiency of the filter element of the welding fume purifier is not less than 99.97% (0.3 micron).

8. The welding fume purifier control system should be automatically controlled.

9. The flow and the suction of the welding fume purifier fan should be balanced, and the noise and vibration should be small to meet the internal use of the workshop.

Looking at the needs of the above 9 technical categories, what kind of welding fume exhaust system should enterprise customers be equipped with.

If you want to buy fume extractor, please contact with Dongguan Pure-Air Tech Co.,ltd, E-mail: sales@pure-airtech.com.