In the metal processing industry, before equipment, accessories and other products are prepared for spraying, welding or other operations, it is generally necessary to clean the metal mechanical surface, such as polishing, polishing, and removing oil, rust, oxide layer, and other electroplating that may be covered on the surface. Aluminum powder explosion-proof dust collector is needed for metal, foundry sand, organic matter, biological material, but how to deal with the metal dust of these processed products.

Grinding and grinding are mechanically cleaned, and equipment such as sandblasting, grinding wheel grinding, sandpaper or belt grinding can be used. No matter what kind of equipment is used for grinding and polishing, it is inevitable that dust will appear. In order to collect these large and heavy dust, the absorption wind speed is usually very high, and the aluminum powder Explosion-proof dust collector should be placed in front of the dust point.

In practical applications, we usually want to use a suction hood as wide as possible. However, if the processed material is toxic, a completely sealed hood may be required. The operator also needs to wear a respirator to cooperate with local inhalation.

The ground dust includes coating materials, metal particles, abrasive materials and wheel binders. Dust is abrasive, cohesive, flammable and explosive. No matter what kind of polishing equipment is used and what kind of dust is generated, a dust hood that can collect dust must be installed. The Explosion dust collection and metal dust with sparks cannot be used at the same time as the dust collection system as close to the operating point as possible.

The capture, transportation and storage of dust is a relatively simple part of filtration management. Both aluminum dust explosion-proof dust collectors and filter cartridge dust collectors are suitable for use. Any sweeper will encounter the same problem. Fiber dust may stay in the pipe, filter, cross-section, or any openings, forming a bond between the flange and the flange. If it is not cleaned for a long time, the pipes and filters of the dust removal equipment will be blocked, so the maintenance of the equipment is very important. It is necessary to clean the barrel, drawer, dust box, etc. regularly.

If you want buy fume extractor, please contact with Dongguan Pure-Air Tech Co.,ltd, E-mail: sales@pure-airtech.com.