Portable fume extractor for welding in different industries has different structural and functional characteristics. Therefore, when using the dust collector in an enterprise, you must read the operation manual of the dust collector carefully to avoid damage to the equipment caused by improper use of the dust collector and personal safety.

Before starting the portable welding fume extractor price, the hose must be connected and fixed to the suction port of the body. If there is no link in place, it will cause the dust collection effect of the dust collector to be greatly reduced, and there will also be a relatively large air leakage noise due to gaps.

Connect the ground wire to the power supply in the workshop to ensure the safety of the dust collector. Industrial dust collectors can generally be used continuously for up to 24 hours to prevent the motor from overheating and burning. PURE-AIR uses Siemens motors, which are reliable in quality and can work continuously for a long time without problems such as heating failures.

When using the dust collector daily, you should be careful not to get the portable welding fume extractor uk wet, and you can't operate machinery and equipment with wet hands. If there are large obstructions or something larger than the diameter of the suction pipe in the cleaned area, remove these large objects first, otherwise the suction pipe will be blocked due to these large objects during the operation of the dust collector.

When the dust collector is used, it should be determined according to the on-site workshop situation, and the suction power of the dust collector can be adjusted appropriately.

When it is found that there is too much dust in the dust storage cylinder in the dust collector, remove the dust on the filter in time, and maintain a good ventilation channel to avoid blocking the filter and causing the suction power to decrease, and the motor overheating causes the service life of the vacuum cleaner to decrease. .

The above is a little maintenance routine given by the manufacturer of the PURE-AIR dust collector. For the specific situation, you can directly call the PURE-AIR personnel, and there will be a more detailed analysis of the dust collector and technology.

If you want buy fume extractor, please contact with Dongguan Pure-Air Tech Co.,ltd, E-mail: sales@pure-airtech.com.