Laser cleaning has solved many unsolvable problems. The manufacturer of
laser cleaning fume purifiers, Pure-Air, will analyze the little knowledge in
laser cleaning for you.
One is to use the cleaning substrate (also called the matrix) and the
surface attachment (dirt) to have a great difference in the absorption
coefficient of a certain wavelength of laser energy. Most of the laser energy
radiated to the surface is absorbed by the surface attachments, so that it is
heated or vaporized and evaporated, or instantly expanded, and is driven by the
formed airflow to separate from the surface of the object to achieve the purpose
of cleaning. The substrate will not be damaged due to the very small absorption
energy of the laser of this wavelength. For this kind of laser cleaning,
choosing the right wavelength and controlling the laser energy is the key to
achieving safe and efficient cleaning.
Another type of cleaning method is suitable for cleaning the laser energy
absorption coefficient between the substrate and the surface attachment, or the
substrate is more sensitive to the acid vapor formed by the heating of the
coating, or the coating will generate toxic substances after the heating. This
type of method usually uses high-power and high-repetition rate pulsed lasers to
impact the cleaned surface to convert part of the beam into sound waves. After
the sound wave hits the hard surface of the lower layer, the returned part
interferes with the incident sound wave generated by the laser, generating
high-energy waves, causing the coating to explode in a small area. The coating
is pressed into powder and then removed by the vacuum pump. It won't hurt.
It can be seen that this type of cleaning has good decontamination ability
for its own subdivisions. Pure-Air laser cleaning dust purifier manufacturers
have been manufacturing laser cleaning smoke filters with a professional
attitude for many years.
If you want to buy a laser cleaning smoke filter, please contact ‘Dongguan
Pure-Air Tech Co.,Ltd.’.