Pure-Air

Location: Home » News Center » news

Contact us

  • 2Building 27, Huakecheng Innovation Industrial Park, Changping, Daojiao Town, Dongguan City
  • sales@pure-airtech.com
  • +8618676972919

PURE-AIR, a professional manufacturer of dust purifiers, small dust collectors, and other equipment for 10 years

Release date:2021-04-16 Source:Pure-Air Pageviews:-

The amount of welding smoke caused by different welding consumables and welding processes is very different. Therefore, the different welding smoke amounts match the different exhaust air volume of the fume cleaner, the dust collector is small, and thevacuum cleaner for welding.Naturally, the more welding fume and dust, the greater the wind speed of the welding fume purifier and the output power of the cooling fan. If it is not, it is impossible to achieve the ideal welding fume collection actual effect, and the newly purchased welding fume dust collector will not be able to. The key to the digestion and absorption of dense smoke is that the output power of the centrifugal fan is too small, and the customer can contact the processing plant to carry out the replacement.

industrial air cleaner

When the filter device filters out the smoke and dust, the large particles of dust will fall into the lower silo, and the small particles of dust will adhere to the surface of the filter device. When deposited, a layer of dust will be generated, which will block the filter holes, which will harm the exhaust air volume of the welding fume purifier, the dust collector is small, and the industrial air cleaner. Blocking will cause weakening of the air volume, and smoking is not allowed. This kind of situation cannot be prevented. The way to remove dust is to introduce the filter device components on time according to the single pulse cleaning equipment. However, with the passage of time, the filter element will still be completely blocked and must be replaced at this time. However, if the compressive strength of the dust collector equipment remains stable for a period of time, it only needs to be replaced once a year.

laser air clean equipment

If the fume purifier, laser air clean equipment, the small chassis and accessories of the dust collector are not completely enclosed, steam leakage will occur during the entire operation of the machine and equipment, and the air volume cannot reach the suction inlet, so it is impossible to collect the smoke of course. . This kind of situation is very rare. This is completely a product quality problem of the manufacturer, and the customer can stipulate that it is completely free to replace.

In general, the key reason why the welding fume purifier can not inhale fume is because the amount of welding fume is large, the output power of the cooling fan is low, the filter element is blocked and the sealing is not good. Therefore, in the application of welding fume purifiers, this factor must be fully grasped in order to improve the high efficiency of the application of machinery and equipment.

If you want buy fume extractor, please contact with Dongguan Pure-Air Tech Co.,ltd,E-mail: sales@pure-airtech.com