Factory safety reminder: Is the metal dust created by the factory combustible? A lot of metal dust is combustible.

Because of moderate fire safety and Explosion-proof equipment, many metal dust fires are limited to vacuum cleaners. However, the case of the Chemical Product Safety Commission (CSB) illustrates that improper handling of metal dust is a safety risk.

On January 3, 2019, another explosion occurred in a metal purchasing plant. A piece of equipment crushed metal shavings into powder, exploded, destroyed the wall, and burned many employees. This kind of safety incident is a significant safety risk. Explosion-proof dust collector

The metal flame ignites from 5000 degrees to 8000 degrees. Once a fire occurs, it is difficult to extinguish. The best solution for factory safety is to check the equipment's hazards and remove loose combustible dust and ignition sources.

Use moderately safe dust removal equipment to develop dust management methods. Appropriate design of vacuum cleaner is one of the most important components in factory cleaning equipment. Leaving the ignition source is likely to mean regular maintenance of all equipment for common faults or over-temperature. It also represents the implementation of all overhauls of the factory, especially the overall safety planning for heat treatment.

All equipment for manufacturing and solving metal dust should have a safety plan for fire extinguishers. Another key safety reminder is that there are established entrances and exits so that everyone can escape quickly. Metal fires can quickly ignite and destroy buildings in a matter of minutes.

Factory safety reminder: Make sure your workshop is installed with Explosion-proof dust collector.

The metal dust caused by laser cutting, electric welding or grinding is very fine, generally less than 0.3μm. It is generally combustible. It is flammable under the internal and working pressure of the cordless vacuum cleaner. Dust removal equipment that complies with NFPA regulations will improve the safety factor of the plant.

According to this reminder, the safety factor of the factory can be further improved, and the damage of metal dust and dense smoke can be reduced.

If you want buy fume extractor, please contact with Dongguan Pure-Air Tech Co.,ltd, E-mail: sales@pure-airtech.com.