Engraving machines sometimes go through a polishing process when engraving various raw material parts, and a lot of polluting dust will be caused in the polishing process. These harmful and polluted dust in the equipment not only affects the processing quality, but also continues to damage the respiratory tract of the staff. There is a safety risk of dust explosion, which seriously endangers the natural environment and the physical and mental health of the staff. Fume extractor equipment is urgently needed.

For the most market-oriented industry, that is the advertising industry, especially the advertising engraving machine, Pure-Air has encountered in many cases. Pure-Air laser engraving fumes extractor & dust cleaning machine manufacture reminds enterprise customers that there are three common problems:

1. One of the three axes of the advertising engraving machine cannot be moved. At this time, check whether the matching drive block of the relative axis is damaged. The inspection method can be replaced by the replacement method: unplug the aviation socket that matches the fixed shaft and plug it into the drive that matches the other moving shaft.

2. If everything is normal for the immovable shaft after the exchange, it can indicate that the matching drive block of the shaft is damaged, and the drive block must be removed and replaced. If the shaft is still not moving, it indicates that the cable or motor has a common fault. Replace the cable or motor. None of the three axes can move. At this time, check whether the three-axis aviation socket has been connected to the control box, and whether the switch power supply of the control box has been turned on. Is the mobile phone charging cable well connected to the led software in the control box and the desktop computer host? If everything above is normal, please contact the factory.

3. The spindle bearing of the advertising engraving machine cannot operate normally. First check the error code indicated by the soft starter's LED display. Solution: Turn the motor over to check if the motor wire is out of phase, and replace the UVW end on both sides at will.

If you want to buy fume extractor, please contact with ‘Dongguan Pure-Air Tech Co.,Ltd.’.