Pure-Air

Location: Home » News Center » news

Contact us

  • 2Building 27, Huakecheng Innovation Industrial Park, Changping, Daojiao Town, Dongguan City
  • sales@pure-airtech.com
  • +8618676972919

PURE-AIR manufacturing, industrial dust collector, mobile industrial dust collector, factory direct sales!

Release date:2021-07-13 Source:Pure-Air Pageviews:-

PURE-AIR Technology Mobile industrial dust collector has strong working ability, high efficiency of ash removal, low discharge concentration value, low air permeability, low energy consumption, small footprint, stable and reliable operation, and economic benefits.

So what caused the destruction of the mobile industrial dust collector?

1. The wind that is overwhelming. The filter wind cannot be too high. In order to control costs and improve efficiency during the production process, any customer has increased the filter wind. There is no response in the short term, but the service life of the filter bag is greatly shortened.

Industrial dust collector

2. The hazard of dust. In the application of dust removal equipment, the characteristics of the dust should be tested to see if there is acid, alkali or other strong corrosive chemicals. The suitable filter material should be selected according to the characteristics of the dust, so that the filter bag can carry out the dust normally. Collect it without jeopardizing its useful life.

3. The temperature hazard during the whole application process. It is necessary to select a filter element that incorporates the corresponding dust temperature. If the temperature of the dust is too high, the filter element used exceeds all normal application temperatures, it will reduce its service life, and the filter element will be damaged more seriously. Therefore, in the case of using a cloth bag To measure the temperature of the dust, select a suitable filter element.

Filter element dust collector

4. The quality of the filter element. Some stores use small processing plants to produce and process filter elements. Because the raw materials are fake and inferior and the production is not strict, they will be disconnected, cracked and dropped after a period of application. The size of the cloth bag is too small and sucks. After a large amount of dust is charged, leakage will occur.

5. The nozzle position of the back-blowing system software of the mobile industrial dust collector. The part of the reverse nozzle is skewed, which will cause the reverse blow to tilt. Therefore, when selecting the Filter element dust collector, you must choose a manufacturer with overall strength. Its quality is guaranteed, and the cost of removing and replacing the filter element is reduced in the middle and late stages.

If you want buy fume extractor, please contact with Dongguan Pure-Air Tech Co.,ltd, E-mail: sales@pure-airtech.com.