The key to the small dust collector is to solve the dust with the help of the dust bag. The small industrial dust collector is a dry test dust removal device that can collect fine, dry, non-chemical fiber dust; but everyone asked, what about the dust in the dust bag To deal with it, I will give a concise, clear and detailed introduction in this article.

The dust removal efficiency of small dust collector air filters is not very high. After the filter material has been used for a period of time, because of the equivalent effects of microporous filtration, impact, retention, spread, and electrostatic induction, a layer of dust has accumulated on the surface of the dust removal cloth bag. This layer of dust is called the primary layer. The primary layer becomes the specific filter layer of the filter material. With the help of the effect of the primary layer, the filter material with relatively large mesh can also obtain higher filtering efficiency. With the accumulation of dust on the surface of the filter material, the efficiency and resistance of the dust collector are relatively improved.

When the pressure difference between the two sides of the filter material is very large, some tiny dust that has adhered to the filter material will be squeezed into the past. The efficiency of the dust collector is reduced. In addition, the resistance of the dust collector is too high, so that the exhaust air volume of the dust removal equipment is significantly reduced.

Therefore, after the resistance of the small dust collector for hair salon reaches a certain value, the dust should be removed immediately. The primary layer cannot be destroyed during ash removal to prevent the efficiency from being reduced.

If you want buy fume extractor, please contact with Dongguan Pure-Air Tech Co.,ltd, E-mail: sales@pure-airtech.com.