Different types of Laser marking smoke purifiers must be used for different laser production and manufacturing geographic environments. So what matters should we pay attention to when choosing Laser soot purifiers?

1. Grasp the characteristics of the geographical environment of production and manufacturing before purchasing, and be sure to figure out the area of the laser workbench, the value of the smoke concentration caused during work, the average daily working time, etc. before purchasing the laser smoke purifier. It is conducive to choosing the laser marking fume purifier with the corresponding specifications and models, controlling the cost, and improving the use time of the vacuum cleaner filter element!

2. At present, the most important purification technologies include physical filtration, chemical formula melting filtration, covalent bond technology, and cutting-edge discharge dust removal equipment. The expected effect of smoke purification is selected by physical filtration technology, and it is best to use a variety of purification technologies to prevent the filter element from clogging too quickly.

3. Filter elements and different filter elements have different expected purifying effects. The laser marking smoke purifier uses four-layer filter elements to filter, and the first layer of primary-effect filter cotton is filtered out.

The second layer of HEPA filter element filters out more than 70 kinds of environmental pollution chemicals such as micro-suspended pathogens, viral infections, germs, bee pollen, asbestos, etc., filtering as small as 0.3 μm, and the purification rate of particles with strong penetrating power is 99. %the above.

The third layer of activated carbon filter element can effectively filter and purify formaldehyde, benzene and various harmful substances.

The fourth layer of HEPA filter element for secondary filtration prevents the activated carbon powder from being carried out of the machinery and equipment with the airflow, ensuring the clean room level of the steam.

4. Purification rate should be the key for every customer to fully consider when purchasing a laser soot purifier. In fact, there is no difficulty for customers to have a high filtration rate for perfectionists. The starting point is good, and the difficulty is based on the geographic location of use. Environment to manage decision-making, is it necessary to ensure a greater filtration rate.

5. Enterprises should fully consider the noise difficulties of laser soot purifiers from the following three aspects: whether the noise under the automatic method is acceptable. Some laser soot purifiers use DC power, brushed motors, super-do-not-disturb mode motors, and add do-not-disturb mode cotton technology, which can effectively reduce noise. At the time of purchase, you can first choose a laser soot purifier that fully considers the use of these two do not disturb mode technologies.

6. A certain amount of oxygen free radicals can eliminate germs, viral infections, and dissolve vaporous environmental pollution chemicals, but too much oxygen free radicals can harm the body, damage the lungs, and cause asthma. It is more serious and can cause carcinogens. At present, the technologies with higher safety performance and better expected purification effect are HEPA net technology and activated carbon technology. When purchasing, you should choose the laser marking Smoke purifier that uses HEPA net filtration and activated carbon technology.

If you want buy fume extractor, please contact with Dongguan Pure-Air Tech Co.,ltd, E-mail: sales@pure-airtech.com.