The operation in the laser cutting process must be standardized, otherwise there will be many accidents. When the environmental protection laser smoke filter is cooperating with domestic large-scale laser cutting processing enterprises to develop new laser cutting dust collector, it understands many laser cutting rules and regulations.

The following 6 points are only part of the laser cutting operation process. For details, you can view the content of previous articles by Zhixin Environmental Protection:

1. Keep the laser, the bed and the surrounding area clean, orderly, and free of oil pollution, and stack the workpieces, plates, and waste materials as required.

2. When using gas cylinders, avoid crushing the welding wires to avoid leakage accidents. The use and transportation of gas cylinders should comply with gas cylinder supervision regulations. It is forbidden to explode gas cylinders in the sun or close to heat sources. When opening the bottle valve, the operator must stand on the side of the bottle mouth.

3. Observe high-voltage safety regulations when repairing. Every 40 hours of operation or weekly maintenance, every 1,000 hours of operation or every six months of maintenance shall be carried out in accordance with regulations and procedures.

4. After starting the machine, manually start the machine in the X and Y directions at low speed, and check whether there is any abnormality.

5. After inputting the new part program, test run it first and check its operation.

6. When working, pay attention to observe the operation of the machine tool to avoid accidents caused by the cutting machine going out of the effective stroke range or two collisions.

So in summary, laser cutting is a high-precision, production and processing laser equipment, but how to better control these equipment requires a deep understanding. Pure-Air factory also knew about long-term cooperation with these large enterprises. Matching to make high-quality laser machine fume extractor.

If you want buy dust collector for laser cutting, please contact with PURE-AIR, the first choice of industrial fume extraction system. E-mail: sales01@pure-airtech.com