Welding air purifier, focusing on R&D and manufacturing of industrial welding fume purification equipment, PURE-AIR technology!

When the Welding fume purifier is started, the fan will generate negative pressure, and the fumes generated by welding will be sucked into the vacuum cleaner by the set suction arm due to the negative pressure of the fan. A fire barrier will be installed at the end of the suction arm to prevent sparks from entering. Protect the purifier; after welding fume enters the filter room, large particles of dust will directly fall into the ash hopper, while small particles of fume will be filtered by the filter cartridge, and the filtered air will be discharged from the exhaust port, and the trapped welding fume particles will be Adsorbed on the surface of the filter cartridge. After a period of filtering, a thick layer of dust will accumulate on the surface of the filter cartridge. At this time, the dust removal system of the welding fume purifier begins to remove the filter cartridge, using compressed air jets to remove dust. The entire Smoke and dust purification process is repeated in this way.

The key to the Welding air purifier's ability to purify smoke and dust is the filter cartridge. There is a layer of PTFE coating on the surface of the filter cartridge, and the pore size of the coating is very small. Dust will not pass through this coating and deposit on the surface of the filter cartridge to reach the surface of the filter cartridge, thereby achieving the deposition effect of the filter cartridge. However, the filter cartridge is regularly filtered by the filter system.

Focusing on one thing for 10 years is to provide good industrial smoke and dust purification equipment to major companies to help solve the problem of smoke and dust pollution in the welding workshop. PURE-AIR welding air purifier manufacturers have been doing it, never stop!

If you want buy fume extractor, please contact with Dongguan Pure-Air Tech Co.,ltd, E-mail: sales@pure-airtech.com.