Regarding the question of which fume purifier is better for laser processing, PURE-AIR technology has clarified the problems encountered by the company when applying laser engraving machines, and it will be clear what the company should prefer when selecting dust hepa filters!

The basic concept of dust remover dust collector is based on the centrifugal fan to inhale the smoke, and based on the physical prevention and filtration, even if the filter is used for shielding, the filter prevents the smoke. With the accumulation of time, the fineness of the filter is The particles become more and more, and finally become saturated, blocking the voids of the filtered vapor, making it impossible to filter. At this time, the filter must be replaced, but it costs money to replace the filter, so many people ask, the filter can be Is it clear?

Whether it can be clear depends on what raw material the filter is made of. If it is a steel mesh, the filter made of steel mesh can be removed and does not need to be replaced. However, the steel mesh is only one layer and cannot filter all fine particles. Be sure to follow it. The filter screen is filtered step by step.

If the engraver laserpp filter is cleared, it will be destroyed, and this layer can only be replaced. There is no other way.

The activated carbon filter of the laser marking smoke purifier is even more difficult to be clear. After the activated carbon is clear, it will turn black and gray, and the activated carbon will melt.

The laser marking fume purifier will produce a layer of filter bag. This packaging bag can only be blown with a hot air torch and cannot be removed. It can only be replaced.

The filter of the laser marking fume purifier must generally be replaced.

If you want buy fume extractor, please contact with Dongguan Pure-Air Tech Co.,ltd, E-mail: sales@pure-airtech.com.