For the application of polishing and dust removal workbenches, the advantages of a polishing and dust treatment machine and equipment continue to be discovered and popularized by everyone. Its reliable quality and high-efficiency purification effect has brought more and more companies specific rights and interests, and solved the problems of air pollution in the workshop and the health of employees from the root cause. lab fume extraction

In the upper right picture, the side partitions and upper partitions of the sanding and dust removal workbench can be opened or disassembled. In the design scheme, the bottom and side air intakes can be designed according to the different load requirements of the customer on the spot. The picture shows a design scheme of a side suction and bottom air inlet lighting fixture.

When the polishing and dust removal workbench is in use, it only needs to be connected to the power supply of the host and run the power switch and the reverse blower power switch. When the employees are working on the surface of the table, the dust caused by the work will immediately enter the filter room below under the effect of the centrifugal fan to carry out purification, slightly Larger dust particles immediately fall into the dust-collecting drawer under the action of heavy capacity, and these μm-level fine particles are evenly absorbed on the surface of the filter cartridge, and the cleaned vapor can be removed from the exhaust system port. Discharged. laboratory fume extractor

With the continuous deposition of dust, the built-in single-pulse ash removal equipment of the Lubo Environmental Protection Polishing and Dust Removal Workbench needs to be used. At this time, the pulse solenoid valve is under the effect of the manipulator to carry out the gas generation from the inside to the outside of the filter cartridge on time. Furnace ash removal. This design can keep the filter cartridge clean, not only can maintain a high purification efficiency of uniform motion, but also extend the life of the filter cartridge. There is no need for personnel to look after the whole ash removal process, which can also save costs for the company. lab smoke extractor

Smooth operation, low noise, low maintenance cost in the middle and late stages;

The tight-playing design scheme not only occupies a small total area, but can also be moved without jeopardizing the regular operation of other machinery and equipment;

Consumables can be removed and replaced smoothly, and after-sales service is convenient and convenient, so that you can rest assured after-sales service.

If you want buy fume extractor, please contact with Dongguan Pure-Air Tech Co.,ltd, E-mail: sales@pure-airtech.com.