The big difference between dust container and dry dust removal equipment is the pulse cleaning system. The impulse cleaning system does not wait for online cleaning. It is undoubtedly convenient and quick to use in the manufacturing plant, and it does not cause adverse effects on production;

After the mechanical equipment is turned on, the dust enter the dust collector with the suction arm. Large and fine particles, dust and flames are blocked when they pass through the mouth of the breathing mask, and then the small particles enter the filter chamber. The dust particles that have been subjected to the interaction force will immediately fall into the ash accumulation drawer cabinet. The tiny dust particles are filtered by the PTFE polyester film filter cartridge, and the vapor after the filter purification treatment is removed from the exhaust pipe of the purification treatment room. Expelled.

The arc welding organic waste gas oil fume filter that is the social and economic development does not have a dust removal system. In order to better be able to remove the filter cartridges, try to pull dust as much as possible. The operation process is as follows: first take out the PTFE polyester coated filter cartridge, clean it with a washer gas boiler, and then put it into the filter room of the arc welding electric welding welding fume purifier.

Obviously, the pulse-type arc welding organic smoke fume filter is simpler in comparison with the social and economic development, and the dust removal efficiency is higher and more stable. In this way, manufacturers who use welding fume extraction for a long time are still very worthwhile to start pulse welding fume purifiers, because in the long run, even if the initial capital allocation is slightly higher, the more they will cover the cost in the latter half of the operation and maintenance costs.

If you want to buy welding dust collector, please contact ‘Dongguan Pure-Air Tech Co.,Ltd.’.