According to the standard, there shall be no zone 20 environment in the workplace. When a large amount of dust accumulates in the dust removal system and there is an ignition source, it is very likely to cause the dust removal system to explode. Therefore, the dust removal system should be configured in the working environment, and the dust removal system should be used in the field. Require.

Especially in some large-scale dust removal central systems, due to the many bends in the pipes, dust accumulation is easy to form in the curved places. If an open flame passes through the dust accumulation, it will immediately form a dust explosion, and the consequences are unimaginable!

R&D and manufacturer of explosion-proof dust removal equipment and laser fume extraction

During the daily operation of explosion-proof dust removal equipment and laser fume extractor ad oracle, it should also be noted that the various parts between the dust and the dust collector may produce electrostatic discharge spark hazards, which can easily lead to dust explosions. In order to avoid the harm caused by static electricity, take Anti-static measures are very important. The conductive parts of the dust removal equipment should be equipotentially connected, and a safe and reliable grounding should be used to conduct static electricity away.

Explosion-proof dust removal equipment and laser machine fume extractors must have explosion-proof distribution boxes with explosion-proof qualification certification, and the equipment must also obtain national explosion-proof qualification certification!

The dust cover of the explosion-proof dust collector needs to meet the requirements of 4 aspects!

First, it can effectively collect the generated dust.

Second, it is the connection between the air outlet and the pipeline that is prone to sparks during operation. Depending on the working conditions, a spark detection and spark extinguishing device should be installed.

The third is to adopt a device that prevents the inhalation of iron sheets and screws that can produce impact sparks.

Fourth, it is to meet the requirement that the wind speed of the air outlet is not less than 1 m/s.

If you want to Buy Fume Extractor, please Contact with Dongguan Pure-Air Tech Co., Ltd, E-mail: Sales@pure-airtech.com.