The manufacturer of Pure-Air Grinding and polishing dust removal equipment for mental tells major companies about some matters needing attention in the
grinding industry, and these matters are easily overlooked. Generally speaking,
the polishing of weld scars is done with a polisher, and the materials are
really different afterwards.
For example, the first type is Hundred Leaves: Hundred leaves is a kind of
material made of traditional sheet-shaped sanding sandpaper cut into relative
shapes, and then glued together to form a grinding sheet. Cooperating with the
grinder and high-speed grinding discs can quickly eliminate welding scars, but
its sharp cutting characteristics, in the hands of inexperienced workers, are
very easy to cause excessive cutting of the main body of the product and hurt
itself. Therefore, it is not recommended for beginners, or it is the best choice
for deep welding scar cutting. The second type of polyester sheet: The overall
material of the polyester sheet is somewhat similar to chemical fiber chemicals.
The surface layer is not very hard. The ground particles are coated on the
surface layer to make it capable of cutting without damaging its softness.
effect. The polyester sheet also has a very good practical effect when the weld
marks are polished. The polyester sheet belongs to the hook-and-loop type
grinding sheet, which is used in conjunction with the sanding machine, and the
actual effect is also very good. ,
In the end, a belt sander must be used. This is based on the selection of
materials. If it is a leveling area, it is better to use a sander. For
tube-shaped materials, we use an abrasive belt machine to match the abrasive
belts of non-woven handmade materials, as well as polishing wax, and polish
again until the tube surface exhibits the glossiness of mirror glass.
The above is a little bit of Pure-Air industrial dust collector
manufacturers' understanding of the grinding and polishing industry. For helpful
companies, the purification of smoke and dust in the workshop is also important.
Welcome all major companies to our factory to visit, guide and consult!
If you want to buy polishing dust extractor, please contact with ‘Dongguan
Pure-Air Tech Co.,Ltd.’.