Pure air laser fume extractor has certain requirements for working temperature. As this is related to the manufacturing materials used, if there is a certain amount of acid-base gas, the dust collection pipe needs to take anti-corrosion measures. If the humidity in the air is high, the dust collector needs to be rust-proof. If the temperature of the gas particles is high, a pre-filter system should be installed in front of the dust collector, which can be used as a water spray cooling or fire-proof filter device.

In addition, a pure-air fume extractor device can also be installed outdoors, but weather factors such as wind and rain should be paid attention to. It is best to take shelter measures. The exhaust cannot be directed towards people. If the chimney needs to be discharged to a high place, a chimney over 10 meters must be installed.

When the industrial pulse dust collector is installed indoors, the appropriate model should be selected according to the site. Due to the difference in size and weight, the supporting conditions used are also different. The vacuum cleaner will produce some noise when it is working, and it will also install a silencer when necessary. If there are explosives in the room, it is best to have a sprinkler system.

After a while, the dust collector still needs inspection and maintenance. For example: interface, seal and solenoid valve, etc., if you need to replace the accessories.

Even if a pure-air nail dust collector is installed in the workplace, it cannot completely remove all dust particles, but can only minimize the dust content in the air. Use a vacuum cleaner to treat the scattered particles to make the air cleaner. If there is more dust in the working environment, the inspection and maintenance cycle of the dust collector should be shortened to ensure a good dust removal effect.

If you want buy fume extractor, please contact with Dongguan Pure-Air Tech Co.,ltd, E-mail: sales@pure-airtech.com.