In many industries, a stand-alone dust collector is required. Such a dust collector can effectively reduce dust and ensure that daily engineering processing is not affected. Pure-Air high quality dust collector & air fume filter with 10 years industry experience focus on high quality product.

The electric control box cover of the stand-alone dust collector should not be opened at will during work. If you need to adjust the cleaning time, or need to check the circuit, you should cut off the power supply and work. The electric control box cover of the stand-alone dust collector cannot be opened during the normal operation of the equipment. This will affect the normal operation of the equipment, and may also cause many hidden operating hazards. Therefore, it is recommended that you do not operate the equipment normally. Open it to do a good job of cleaning dust, or we need to do an inspection of the internal circuit, then we must stop the machine before we can continue the internal disassembly, so as to ensure the good use effect.

In order to ensure that the dust removal equipment is in good working condition, it should be as close as possible to the source of dust, generally 1.5 meters to 2.0 meters is better. The connecting pipe should be as short as possible, and the elbow should be minimized to avoid increasing resistance.

Before the stand-alone dust collector works, check whether the inspection door, the ash outlet door, and the air duct connection system are sealed to avoid leakage and reduce the dust collection effect.

Pure-Air, factory direct sales fume filter & mobile dust collector, and other industrial dust purification equipment with high quality.

If you want to buy fume filter, just contact with ‘Dongguan Pure-Air Tech Co.,Ltd.’.