PURE-AIR Mobile industrial dust collector has high dust removal efficiency, high purification efficiency, strong wind power, energy saving and environmental protection, small workshop area, safe and stable operation, and long service life. It is supported by major enterprises! .

So what are the reasons for the damage of the mobile Industrial dust collector or the low dust removal efficiency?

1. Filtered wind speed. The filter wind speed should not be too high. In the production process, any customer may increase the filter wind speed to manipulate the cost and increase the output. This does not show up in a short time, but it greatly shortens the application period of the dust bag.

2. Dust damage. In the use of dust collector equipment, the characteristics of the dust need to be tested to see if there is acid, alkali or other strong corrosive compounds. The appropriate filter system should be selected according to the characteristics of the dust, so that the dust bag can carry out the dust normally. Collection does not hurt its application deadline.

3. Use the temperature damage during the whole process. It is necessary to select a filter element that melts into the relative dust temperature. If the temperature of the dust is too high, the selected filter element exceeds all normal operating temperatures, and its application period will be reduced, and the filter element will be destroyed more seriously. Therefore, when choosing a cloth bag Under the circumstances, it is necessary to calculate the temperature of the dust and select the appropriate filter element.

4. The quality of the filter element. Some businesses use small family workshops to produce and process the filter element. Due to the fake and inferior raw materials, the line will be broken, cracked and the bottom will be dropped after a period of time. The specifications and models of the cloth bag are too high. After sucking very large dust, it will cause leakage.

5. The printer nozzle part of the back-blowing cleaning system inside the Mobile dust collector. The inclination of the print head of the reverse printer will cause the skew of the reverse blowing. Therefore, when selecting the filter element dust collector, you must choose a manufacturer with an overall level of quality. The quality of the filter element is guaranteed, and the cost of removing the filter element is reduced in the second half.

If you want buy fume extractor, please contact with Dongguan Pure-Air Tech Co.,ltd, E-mail: sales@pure-airtech.com.