Dongguan Pure-Air is a professional manufacturer of Pulse dust collector
industrial dust purification equipment!
The centrifugal fan creates a vacuum pump under the moderate working
pressure of the cyclone car, and the adsorption force caused by the blower motor
reaches the range hood located around the dust discharge area according to the
filtering system software and pipeline. The design of the range hood is
dedicated to capturing a lot of dust.
The position of pulse dust collector&industrial dust purification
equipment and the specifications of the fume hood determine the amount of dust
collected. Once the dust is captured, it will be transmitted to the filter
module according to the pipeline. In the filter module, the primary and
intermediate level filtration is carried out according to the partitions. Large
dust particles are filtered in the area. The fine dust particles of the gas pass
through the bottom end of the tube-shaped bag filter, and the foundation of the
dust particles settles on the filter bag. Surface surface.
The Pure-Air pulse dust collector can be heated to 400~500℃. This has
always been an area out of reach of cloth bags and filter cartridges. From a
certain basic principle, the principle of the cartridge filter and the bag
filter is the same.
The difference between pulse dust collector&industrial dust
purification equipment is:
1. The filtration precision is different, and the filtration precision of
the cloth bag is generally within the range. The filtration precision of the
filter cartridge is too low to be able to achieve the dust removal equipment
with magnetic vibration.
2. Equipment maintenance and management are different. The maintenance of
the filter cartridge dust collector is much more convenient than the maintenance
of the cloth bag. Generally, if the dust collector equipment with the same
exhaust air volume, the filter cartridge must be maintained for 1 day, and the
cloth bag is less necessary three days.
The most typical reason for the damage
of the filter bag is that the surface layer of the filter material is stuck
together or the dust plug caused by a part of the temperature and the corrosion
caused by the composition of the organic chemical layer are exposed. The filter
bag dust removal framework causes deformation, and abnormal cyclone smoke inside
the filter bag can also cause the filter bag to damage the bag at a certain
level.
If you want to buy PURE AIR dust collector, please contact ‘Dongguan
Pure-Air Tech Co.,Ltd.’.