Dust and smoke efficient purification equipment, the use of PURE-AIR dust
removal equipment vacuum cleaner, small dust removal machinery.
When using these dust removal equipment, the air volume decreases suddenly,
and the dust removal efficiency decreases, which can be checked and eliminated
by referring to the following methods.
1. Check the silo. When checking the common faults of dust removal
equipment vacuum cleaner, & small dust removal machinery, you should check
and clear the corner of the dust collector. If there is no rotary valve in the
silo of your dust collector, please ensure that the silo has been cleared on
time. In addition, if you do have a rotary valve, please check the silo to
ensure that the gate valve discharges normally and that the raw material does
not easily block the bag filter. A full silo is likely to promote dust to enter
the cyclone again, which greatly increases the dust load and may load the bag
filter.
2. Check whether there is moisture in the body. Excessive moisture in the
compressed air flow will cause the dust bag to be blocked, and it is likely to
cause incorrect cleaning and reduce the service life of the dust bag. This kind
of moisture should be solved with compressed air dryer. In addition, look for
all oil leakage, because the oil in the air from the air compressor will also
cause the dust bag to block and harm the dust removal equipment.
3. Check the timer When checking the timer, observe the LED indicator on
the circuit board to start the actual operation of the timer. Check the LED
light on the visual effect, and check the single impulse sound on the auditory
system.
4. Check the relay: The common faults of the relay are likely to cause the
pulse solenoid valve to not work normally or to be invalid. This kind of damaged
gate valve must be repaired immediately.
5. Consider the cooler: the water condensate from the natural ventilation
gas of high ambient humidity enters the air-conditioning pipeline or the bag
filter, which will cause the dust bag to be blocked. The clogged dust bag will
probably have to be overhauled to avoid multiple problems. Consideration should
be given to the external insulation of the bag filter and the hose. Difficult
problem 2: The exhaust air volume of the bag filter is too small. The fume
extractor smoke evacuator with low exhaust air volume will not digest and absorb
the dust enough.
If you want to buy dust removal machine, please contact with ‘Dongguan
Pure-Air Tech Co.,Ltd.’.