Pure-Air soldering smoke extractor manufacture, let you know the difference brtween traditional solder and laser solder. The contact surfaces of the two solders are different, so the wind force required for the soldering smoke extractor is also different.

The traditional soldering machine uses contact welding, and the soldering iron tip is bound to put a certain pressure on the welding workpiece during welding. However, in some high-end transmission fields, there is a transmission risk. In contrast, laser welding can avoid this risk. The welding adopts non-contact welding, which will not produce pressure on the welding components, and can well prevent the influence of pressure on the components.

1. The difference in consumables

The traditional soldering process uses a soldering iron tip to provide the required heat. As the soldering progresses, the soldering iron tip ages, and the soldering temperature does not meet the soldering requirements. It is necessary to replace the soldering iron tip, which will increase the welding cost. However, laser welding does not use soldering iron tip welding. There will be no damage to the soldering iron tip, reducing production costs. Moreover, the welding temperature is stable during laser welding, and the welding quality is stable.

2. The difference in processing accuracy

Traditional welding has limited welding accuracy due to the limitation of the welding process itself, while laser welding has a beam spot up to micron level, and the welding accuracy is much higher than that of traditional soldering machines.

Energy consumption

Because the traditional soldering process is heating the whole board, it causes a lot of meaningless heat loss and increases the power loss. However, laser welding uses partial heating, which has a small heat consumption and no heat generation when not welding, which is relatively energy-saving. Reduce the cost.

Pure-Air, a professional R&D and manufacturing process fume purification equipment, a soldering fume filter effectively purifies harmful gases and fume in the workshop.

If you want to buy well solder fume extractor, please contact with ‘Dongguan Pure-Air Tech Co.,Ltd.’.