Location: Home » News Center » news

News Center

Contact us

  • 2Building 27, Huakecheng Innovation Industrial Park, Changping, Daojiao Town, Dongguan City
  • sales@pure-airtech.com
  • +8618676972919

Purify the smoke and dust produced by laser cutting, Pure-Air laser cutting smoke filter!

Release date:2021-02-22 Source:Pure-Air Pageviews:-

The laser cutting machine in the laser company uses a high-power density laser beam to irradiate the workpiece to quickly melt and vaporize the irradiated material. At the same time, the high-speed airflow coaxial with the beam blows off the molten material, thereby realizing the cutting of the processed part. The process of dust and smoke generation. Pure-Air laser cutting smoke filter effectively purifiers.

So what are the reasons for the dust generated by the laser cutting machine?

Laser oxidation cutting: Under the focus of the laser beam of the laser cutting machine, the surface of the metal material can be quickly heated to the ignition temperature, and then undergo a strong combustion reaction with oxygen, releasing a large amount of high temperature heat, and forming small holes in the material , The small holes are surrounded by molten metal walls. These steam and molten materials are taken away by the auxiliary airflow, and then float on the factory floor, forming dust and smoke.

laser smoke purifier

Laser vaporization cutting: Under the heating of high-power density laser, about half of the material vaporizes into steam and disappears, and the remaining material is blown away from the bottom of the slit as an ejection by the auxiliary gas, and combines with the fine particles in the air to form dust.

Laser melting cutting: When the power density of the incident laser beam exceeds a certain value, the irradiated material begins to evaporate, forming holes, and the material around the laser speed of the laser cutting machine is melted. Then, the auxiliary airflow coaxial with the speed of light takes away the surrounding molten material and forms smoke.

Pure-Air, a laser cutting smoke filter, focuses on solving the pollution and purification problem of the laser cutting workshop, and purifies the smoke and smell of the workshop. With more than 10 years of R&D and production experience, Pure-Air has a deep understanding of pollution in the laser industry.

dust collector

If you want to buy a dust collector, please contact “Dongguan Pure-Air Tech Co.,Ltd.’