In industrial production and processing, laser cutting processing is used in large quantities in the field of carbon steel processing and manufacturing due to its excellent performance such as fast, efficient, high-quality, and high-yield. However, due to the lack of understanding of laser cutting machine processing, many enterprise users may encounter various problems in the process of using laser cutting machine, which affects the normal operation and cutting quality of laser cutting machine. Below, the PURE-AIR laser cutting smoke filter manufacturer will analyze the situation for you.

When laser cutting carbon steel, the burrs on the processed parts generally cause burrs on the processed parts. The possible reasons include:

1. The focus position of the laser head of the laser cutting machine is shifted. Perform a focus position test and adjust according to the offset of the laser focus. ;

2. The output power of the laser cutting machine is not enough. It is necessary to check whether the laser generator is working normally. If it is normal, observe whether the output value of the laser control button is correct. If not, adjust it in time;

3. The line speed of the laser cutting machine is too slow, and the line speed needs to be increased during the control of the operating system to ensure normal operation;

4. The gas purity of the laser cutting machine is not up to the standard, and it is necessary to provide high-quality cutting working gas;

5. If the machine tool runs too long, there will be shaking and instability, and it needs to be shut down and restarted.

Laser cutting machines are expensive high-tech processing equipment. Once various problems and conditions occur during operation, it will be laborious and costly. Therefore, you must fully understand the smoke and smell in the workshop. Purify well. PURE-AIR laser smoke filter manufacturer can effectively purify the smoke and dust of laser cutting workshop.

If you want to purchase fume extractor,please contact “DongGuan Tech Co,Ltd.”Thank you.