Industrial equipment will generate a lot of dust during use, especially the polishing and grinding machinery and equipment will be designed with corresponding workshop salon fume for dust treatment. So what kind of dust does the polishing dust belong to? This needs to discuss several sources of dust generation.

For ordinary steel plate rust removal, it is mainly oxide scale, dirt, paint and some projectile powder. These dusts are not small in concentration and are metal dust (different metal dusts have different characteristics, and some metal dusts are easy to burn, so you should Special attention) For dust, use the two vacuum outlets of the dust collector, and only calculate the air pressure and air volume. Use two small devices, one end can also be used, mainly depending on the choice of air volume and air pressure.

Why do we have to choose salon hair equipment fume extractor? That's because the shot blasting machine is generally placed in the factory, and the height of the factory is generally only six or seven meters. If the height of the bag filter is limited, it is more suitable to choose a cartridge filter. At the same time, the advantages of the cartridge filter itself also determine that the use of the cartridge filter is inevitable.

There will be some oily metal dust in newly produced workpieces and castings, because they are oily and can easily cause fires. This must be taken into consideration when choosing salon nail dust extractor. Shot blasting machine is not the only choice for purifying filter cartridge dust collector, and bag dust removal equipment can also be used. It is impossible to conclude which dust removal equipment is better used. But the common point is that no matter what kind of dust removal equipment is used, the dust needs to be cleaned regularly.

If you want buy fume extractor, please contact with Dongguan Pure-Air Tech Co.,ltd, E-mail: sales@pure-airtech.com.