In response to the question of which dust fume extractor is better, PURE-AIR technology has clarified the problems encountered by enterprises when using marking machines, and then we will know what the preferred direction for enterprises to choose laser marking fume extractors is!

The basic principle of dust removal equipment for soldering is that even if the thick smoke is sucked in by a centrifugal fan, it is blocked and filtered according to physics, and even if the filter has a shielding effect, the filter can block the thick smoke. With the accumulation of time, the filter is There are more and more particles, and the final saturated state will block the gaps of the filtered gas, making it impossible to filter. At this time, the filter must be replaced, but the replacement of the filter is costly, so many people ask, filter Can the net be clear?

Can you know which materials the filter is made of? If it is a steel mesh, the filter made of steel mesh can be cleaned and does not need to be replaced. However, the steel mesh only has one layer that cannot filter all the particles, and the filter behind it is necessary. Filter layer by layer.

If the extractor for laser machinepp filter is removed, it will be damaged. This layer can only be replaced. There is no other way.

The activated carbon filter of the laser marking smoke purifier is even more difficult to clear. After the activated carbon is clear, it will become gray-black and the activated carbon will melt.

There will be a layer of filter bag in the laser marking smoke purifier. This packaging bag can only be blown with a hot air gun. It cannot be cleaned and only replaced.

The filter of the laser marking fume purifier must generally be replaced.

If you want buy fume extractor, please contact with Dongguan Pure-Air Tech Co.,ltd, E-mail: sales@pure-airtech.com.