Pure-Air factory is well known by many companies in the laser welding
industry because of the laser welding fume filter.
The metallurgical physical process of laser deep penetration welding is
very similar to electron beam welding, that is, the energy conversion mechanism
is organized through the "small hole" structure. Under the focused beam of
sufficiently high power density, the material evaporates to form small holes.
This steam-filled hole is like a black body, which absorbs almost all the energy
of incident light, and the equilibrium temperature in the cavity is as high as
about 25,000 degrees. The heat is transferred from the outer wall of the
high-temperature cavity to melt the metal surrounding the cavity to achieve the
purpose of fusion welding.
The small hole is filled with high-temperature steam generated by the
continuous evaporation of the wall material under the irradiation of the light
beam. The four walls of the small hole are surrounded by molten metal, and the
liquid metal is surrounded by solid materials. The liquid flow outside the pore
wall and the surface tension of the wall layer are maintained in a dynamic
balance with the continuously generated steam pressure in the cavity. The light
beam continuously enters the small hole, and the material outside the small hole
is continuously flowing. As the beam moves, the small hole is always in a stable
state of flow.
Factors affecting laser deep penetration welding include: laser power,
laser beam diameter, material absorption rate, welding speed, shielding gas,
lens focal length, focus position, laser beam position, laser power at the start
and end points of welding Gradually rise and fall control.
In the laser welding fume filter industry, Pure-Air has more than 10 years of rich experience in
cooperation, is also very familiar with the technology of many laser companies,
and has long-term supporting environmental protection equipment.
If you want to buy welding smoke purifier,kindly contact ‘Dongguan Pure-Air Tech
Co.,Ltd.’.