PURE-AIR is a laser smoke filter manufacturer with industry experience.
There are many applications of laser environmental protection equipment and a
wide range of products, which are suitable for the needs of various laser
processing companies at home and abroad.
The field of laser smoke filter application industry:
Laser marking metal/non-metal
1. The smoke and dust produced by laser marking metal are mainly fine metal
dust. This kind of dust is easy to block the filter with general smoke purifiers
on the market, and the cost of consumables is high.
2. The smoke and dust produced by laser marking non-metals are mainly tiny
dust and smoke. This kind of smoke and dust collector mainly has the characteristics of
small particle size, viscosity, and odor. It is necessary to solve the clogging
problem of dust particles and the problem of odor In some working conditions,
the peculiar smell of smoke and dust is also corrosive. In response to this
situation, Pure-Air has developed a laser smoke filter with a multi-stage filter
device to solve the above problems.
3. Laser welding processing
The smoke and dust produced by laser welding are mainly high-temperature
dust and smoke. This type of smoke and dust mainly has the characteristics of
small particle size, viscosity, and high temperature. Because of laser welding,
especially continuous welding, it is easy to continuously produce
high-temperature gas and sparks. Ignite the filter, thereby creating a safety
hazard. In response to this working condition, Pure-Air has developed a
high-temperature-resistant, flame-retardant series of laser smoke purifier with
pre-spark traps to prevent the filter from burning out.
Laser cutting and adsorption dual purpose
When a low-power laser cuts flexible sheets such as FPC, pole piece,
aluminum foil paper, etc., it is necessary to first adsorb the cutting workpiece
on the work surface and vacuum while processing. This requires a host to achieve
two functions. For this working condition, Pure-Air has developed a series of
industrial dust collectors with high negative pressure and silent. The power of
4.0kw can achieve noise below 60dB (A).
Laser welding workstation
Robot/manipulator welding will generate a lot of dust, smoke and odor. If
it is not processed in time, it will cause environmental pollution and damage to
precision accessories such as laser heads. It can be filtered for special
scenarios.
If you want to buy a fume extractor,please contact 'Dongguan Pure-Air Tech Co.,Ltd.'