Laser fume extractor filtration!

1. The activated carbon adsorption module of the industrial smoke and dust purifier is installed in the drawers of the facility box, which can be easily removed from the inspection doors on both sides.

2. The inspection door is easy to open and tightly sealed. It can be opened separately and removed independently.

3. The base frame is made of bad steel, and the strong base frame can ensure the equipment installation and transportation regulations.

4. The inlet (outlet) air port is a wafer check valve socket, which can be connected to a ventilation duct. The specification, location, and orientation can be allocated according to specific regulations.

5. The exhaust gas from the smoke and dust industry must be prepared by the laser industry dust collector machine before it can enter the activated carbon adsorber for purification to meet environmental protection standards.

6.laser industry dust collector machine activated carbon adsorption machine equipment can use different materials according to different organic waste gas characteristics: the main body can be stainless steel plate, carbon steel, galvanized steel plate, PP plate, etc., activated carbon is a gray-black powder Shaped, granular or pellet-shaped amorphous carbon with porous structure. The key active ingredient is carbon, which also has a fine structure like high-purity graphite, only the crystals are small, and the layer is not standardized to deposit grams), has a strong adsorption capacity, and can adsorb vapor, liquid or liquid on its surface. Colloidal solid, the adsorption of gas and liquid can be close to the quality of activated carbon itself.

If you want buy fume extractor, please contact with Dongguan Pure-Air Tech Co.,ltd, E-mail: sales@pure-airtech.com.