10 years of professional production and manufacture of filter cartridge dust collectors, mobile supply dust collector manufacturers.

The friction resistance of the vacuum cleaner for nails expands with the increase of the thickness of the soot layer on the surface of the filter material. Clean dust when the friction resistance reaches a certain standard value. At this time, the PLC system controls the opening and closing of the pulse solenoid valve. The first chamber raising valve is closed to disconnect the filter air flow, and then the pulse solenoid valve is opened, and the air compression and a short period of time swell in the upper box body quickly, rushing into the filter cartridge, causing the filter cartridge to swell and deform and cause vibration , And under the effect of reverse air flushing, the smoke and dust adhering to the surface of the dust removal bag are separated and dropped into the ash bucket.

After the vacuum cleaner for salon, the vacuum cleaner for salon is finished, the pulse solenoid valve is turned off, and the boost valve is opened, and the filter is repaired in the chamber. The cleaning rooms are carried out successively, from the first room cleaning to the next cleaning cycle gradually. The falling smoke and dust fall into the ash hopper and are discharged according to the ash unloading valve.

The relevant professional knowledge of the filter cartridge dust collector is the one introduced to everyone in the previous article. According to the simple and detailed introduction above, everyone knows what is a cartridge type dust collector and a cartridge type dust collector. The structure and principle firmly believe that for the actual operating staff who actually operate the filter cartridge dust collector, it is very necessary to master this kind of knowledge about the filter cartridge dust collector and the mobile supply dust collector.

If you want buy fume extractor, please contact with Dongguan Pure-Air Tech Co.,ltd,

E-mail: sales@pure-airtech.com