Pure-Air

Location: Home » News Center » news

Contact us

  • 2Building 27, Huakecheng Innovation Industrial Park, Changping, Daojiao Town, Dongguan City
  • sales@pure-airtech.com
  • +8618676972919

PURE-AIR welding air purifier, efficient purification of welding fume pollution, the choice of welding enterprises!

Release date:2021-05-13 Source:Pure-Air Pageviews:-

1. The daily cleaning of welding air purifiers is very simple.

The concept that needs to be corrected is that non-Welding fume purifier can be used to ignore its operation after it is equipped. Regular cleaning and maintenance of equipment is a necessary measure


It is recommended to clean the welding fume purifier regularly (within a month), clean the dust on the filter screen, and clean the dust in the dust collecting drawer in time to avoid excessive dust accumulation, which affects the operation of the machine and causes insufficient suction.

Pulse welding air purifier

2. If it is clogged, please clean the filter cartridge deeply.


If you find that the dust removal effect is reduced and the dust is discharged from the air outlet, you should be vigilant at this time. The filter cartridge may become clogged. At this time, the filter cartridge needs to be cleaned. The general operation is to take out the filter cartridge, tap it with a stick, clean it with a brush, or blow it with compressed air from the inside to the outside to make the dirt fall off. In addition, it is necessary to judge whether it can be cleaned according to the material of the filter cartridge, and do not operate blindly.

In fact, for the cleaning of filter elements, it is recommended to use Pulse welding air purifier. The environmentally friendly dust removal equipment is equipped with a pulse back blow system, which can automatically remove dust, which brings great convenience to people. The equipment dust removal effect is stable, and it is very important to extend the service life of the filter cartridge.

Filter cartridge dust collector

3. Check whether all parts of the equipment are sealed.

The weakening of the suction power of the welding air purifier may be due to the air leakage caused by the sealed connection of the equipment, such as the air inlet, the suction arm pipe, and the fan. Therefore, it is necessary to check the sealing condition of the equipment regularly to eliminate the problem in time.

4. Regular maintenance of the fan.

The fan is the power system of the entire Filter cartridge dust collector. When the air volume is weakened, the fan may naturally fail. Generally speaking, the air intake reduction caused by the fan quality problem is very small, mainly caused by improper maintenance of the fan. We should refuel the fan regularly, tighten and maintain the fan connector regularly.

If you want buy fume extractor, please contact with Dongguan Pure-Air Tech Co.,ltd, E-mail: sales@pure-airtech.com.