Before selecting the equipment, please provide the laser equipment type, equipment processing width, processing materials, average daily working hours and other parameters, and we will customize the adaptation plan for you!
If the processing material is flammable metals such as aluminum-magnesium alloy and titanium alloy, or there are flammable gases in the workshop, an explosion-proof model must be selected, and ordinary models can be selected for other scenarios.
The smoke from laser processing of metal materials needs to be equipped with a spark arrester + flame retardant filter element;
The smoke from laser processing of plastic/wood is recommended to adopt a multi-stage filtration combination design; high-humidity smoke requires a moisture-proof design.
The filter element replacement cycle is different under different processing frequencies and processing conditions of different materials. PURE-AIR's smoke purifier has a filter element status monitoring system, and customers can easily know when the filter element needs to be replaced.
It may be caused by pretreatment failure (such as sparks not intercepting and burning through the filter element), excessive smoke concentration or excessive ambient humidity, resulting in agglomeration. It is necessary to check the matching of the pre-filtration system with the working conditions.
Only metal sintered filter elements can be cleaned a limited number of times, and HEPA/PTFE coated filter elements cannot be cleaned. Forced flushing will damage the filter structure.
PURE-AIR's latest PIPS purification system has a real-time display function for the filter element usage status, real-time prompts for the filter element status, and supports early replacement reminders.
Standard models support 220V single-phase electricity, and high-power equipment requires 380V three-phase electricity. Export models can be customized with single-phase 110V or three-phase 220V, 400V, 415V, 440V and other different voltages and frequencies
The basic model supports key panel control.
The smart model supports I/O remote start and stop control, RS-485 control, and some can be connected to the MES system.
The latest PIPS purification system of PURE-AIR has a built-in sensor to monitor the status of the filter element in real time, automatically adjust the fan speed, and realize automatic compensation between the actual air volume and the set air volume.
RS485 networking can be used to achieve centralized start and stop and air volume coordination, which is suitable for large workshops with multiple workstations.
DONGGUNA PURE-AIR TECH CO., LIMITED
Breathe Pure Air with Our Ultra-efficient Fume & Dust Purifier.
Copyright © 2025 Dongguan Pure-Air Tech Co., Limited
